The-1879-Marshal CCW Belt In Black From Avery Case And Saddle
belt-decorations.jpg

The "1881 Lawman" EDC/CCW Belt

from $115.00
Only 4 available

The 1881 Lawman Full Grain Stirrup Leather Belt For Work Or CCW

Designed for those who carry every day and demand maximum support from their belt. Built for larger firearms, heavier carry setups, and those who simply prefer a belt with exceptional structure, the Lawman is our most substantial concealed carry belt.

Where the 1879 Marshal balances support and everyday comfort, the Lawman prioritizes strength and stability above all else. The 1879 Marshal has a waxy feel, while the 1881 Lawman has a traditional hand rubbed saddle oil finish.

Built from 1.5", 13–15 oz. USA stirrup leather, selected for its density, rigidity, and resistance to stretching under load. Traditionally used in tack where strength and reliability are critical, stirrup leather provides a firm foundation for concealed carry while maintaining a clean, traditional appearance.

Finished with heavy-duty hardware chosen for long-term durability and dependable performance. Built to support the weight of your carry system without twisting, sagging, or losing its shape over time.

Designed for purpose. Fit to the individual. Available in one-inch sizing with your choice of hardware, adjustment hole configuration, and logo placement.

Built in small batches, not pulled from a shelf. About two weeks from start to finish—the time it takes to do it right.

Need help with sizing? → Belt Sizing Guide

The 1881 Lawman Full Grain Stirrup Leather Belt For Work Or CCW

Designed for those who carry every day and demand maximum support from their belt. Built for larger firearms, heavier carry setups, and those who simply prefer a belt with exceptional structure, the Lawman is our most substantial concealed carry belt.

Where the 1879 Marshal balances support and everyday comfort, the Lawman prioritizes strength and stability above all else. The 1879 Marshal has a waxy feel, while the 1881 Lawman has a traditional hand rubbed saddle oil finish.

Built from 1.5", 13–15 oz. USA stirrup leather, selected for its density, rigidity, and resistance to stretching under load. Traditionally used in tack where strength and reliability are critical, stirrup leather provides a firm foundation for concealed carry while maintaining a clean, traditional appearance.

Finished with heavy-duty hardware chosen for long-term durability and dependable performance. Built to support the weight of your carry system without twisting, sagging, or losing its shape over time.

Designed for purpose. Fit to the individual. Available in one-inch sizing with your choice of hardware, adjustment hole configuration, and logo placement.

Built in small batches, not pulled from a shelf. About two weeks from start to finish—the time it takes to do it right.

Need help with sizing? → Belt Sizing Guide

Style:

  • In 1881, tension in Tombstone came to a head at the Gunfight at the O.K. Corral.

    It wasn’t a long fight. It wasn’t clean.
    Thirty seconds of violence settled years of pressure between lawmen and outlaws.

    Men like Wyatt Earp and Doc Holliday didn’t dress for show. They wore what held up—day after day—without question.

    That’s what this belt is built around.
    Not flash. Not polish. Just something that works when it matters.

  • This one starts where most belts stop.

    14+ oz stirrup leather—the same cut used for the hardest-working part of a saddle. It’s dense, heavily fibered, and built to carry load without stretching out or collapsing over time.

    It’s not refined like bridle. Not as dressed as harness.
    This is working leather.

    Finished by hand with saddle oil, not a surface coating. It soaks in, darkens the grain, and leaves the leather with a low, natural pull-up that shows wear instead of hiding it.

    You’ll feel it immediately—heavier in the hand, firmer through the body.
    It takes time to break in, but once it does, it settles into shape and stays there.

    Same purpose as the Marshal. Different approach.

    • Stirrup leather (14+ oz) — thicker, denser, less processed

    • Hand-rubbed saddle oil finish — penetrates instead of sitting on top

    • Carries weight without folding — built for daily load, not occasional wear

    • More raw character — marks, grain variation, and honest wear over time

    Hardware is solid brass or stainless. No plating to wear through.
    Hole options—3, 5, or 7—cut clean, spaced right.

    This isn’t a dress belt.
    It’s not trying to be.

    It’s for the man who needs a belt that holds its ground—and doesn’t soften up just to feel easy on day one.

  • The Build Sheet

    ✅ Rugged Top Quality Leather
    13/15 Ounce Stirrup Leather From USA Steerhide - Medium Temper.

    ✅ Quality Hardware
    Solid Brass Or Solid Stainless Steel. Imported.

    ✅ Keeper
    Matching Leather - Formed On A Loop Iron The Way It Should Be, Double Stapled, Optional Dual Keeper

    ✅ Options
    Adjustment Holes - Up To 9 For CCW Belts. Logo Placement. Stitching, Grooves, Or Embossing Options. Trophy Style Option. 1 Inch Sizing

    ✅ Edges
    Oil Dyed, Hand Burnished, Finished With Beeswax.

    ✅ Finish
    Matte, Finished With Aussie Conditioner, Hand Rubbed.

    ✅ Lifetime Value
    Crafted To Be A Lifetime Companion. Limited Lifetime Warranty.

    ✅ Unmatched Craftsmanship, Handcrafted In The USA
    Unique Designs Made With Pride, Precision, And Purpose In The USA, Using As Many American Made Products As Possible. Hand Cut And Finished. No Cheap Fillers, No Edge Paints, No Compromises, No BS.